Solidsteel SS Series Speaker Stands

Note: All Solidsteel stands ship with spikes and floor protector discs. You do not need to order these separately.

It is of critical importance for the performance of monitor-type loudspeakers to have them positioned at the correct height. Additionally, since this type of speaker is often relatively light compared to floor-standing units, it is essential to maintain high stability and rigidity. And, as with all components, proper decoupling must be considered.

The Solidsteel SS Series fulfils a longstanding need regarding the proper setup and anjoyment of monitor speakers, and must in many ways be considered as important as the units they support. The three tubular supports end with a crimped steel bar. The stainless steel spikes are removable to allow the frame to be filled with damping material.

The top plate in MDF is interchangeable, ensuring a high degree of optimization with the largest number of loudspeakers. Decoupling between the chassis and the shelf is achieved through three high-precision ball bearings. The SS stands are also supplied with Pata-fix to properly fix the speaker to the top plate.

Specifications

SS-5

Dimensions (WHD): 13″ x 20.7″ x 12.2″
Top-plate dimensions: 7.5″ x 7.5″
Weight: 25.35 lb

SS-6

Dimensions (WHD):13″ x 24.6″ x 12.2″
Top-plate dimensions:6.3″ x 6.3″
Weight:26.9 lb

SS-7

Dimensions (WHD):13″ x 28.5″ x 12.2″
Top-plate dimensions:6.3″ x 6.3″
Weight:28.66 lb