50% OFF! Hot items selling fast—Grab them before they're gone!

Soundsmith Otello ES Moving Iron Cartridge

$150.00 $599.95

  • Unconditional Satisfaction Guarantee
  • No Shipping Fees Above 30
  • 2 Months to Decide. Returns Simplified.
SKU: MVK600398941
Category:

Soundsmith Otello ES

New ES Series DEMS Design

Made in USA. Rebuild Price? ~ $100~Less Than 20% of MSRP, as always!– TheOtello features a2-year warrantyto the original owner.

The Otello is Soundsmiths entry-level fixed coil design, realizing an affordable pathway into the world of high-performance cartridges. Built by hand like all Soundsmith cartridges, the Otello provides a perfect balance of tone and resolution at a great price. The result is a cartridge that is at ease with any type of music. Just slightly warmer than other Soundsmith designs, Otello yields a richness of timbre that is utterly beguiling with a level of speed and dynamic range that no other cartridge in this price. The result? A wonderful design that gives the warmth of MM and the light-footedness of Moving Iron design.

What is DEMS?

Sometimes youcanjudge a book by its cover. Peter Ledermann.

2018s RMAF show was the official launch of Soundsmiths new ES series of cartridges, where the attendees experienced the latest exploration into overlooked areas of cartridge design and solutions from Soundsmith.

The ES line features not only a dramatic newlook,but is a significant evolution of the DEMS system design(Dynamic Energy Management System). The new Soundsmith ES cartridge designs are a significant advancement in cartridge performance due to their ability to direct internal vibrational forces without reflection and disperse them properly to thetonearm. The absence of reflections enables the stylus to stay in far greater statistical contact with the groove walls a critically important technical refinement. Increased liquidity and reduced grain, without loss of detail are some of the immediately discernible advantages of Soundsmiths new ES models.

The new line also features Azimuth adjustment built-in to each cartridge, as well as the option for electrical isolation for hum-prone systems.

Every cartridge in Soundsmiths lineup will now featureits sleek new ES body design. The upgrade is far more than cosmetic; the new shape is a departure from the reflective and boxy design of many cartridges whose internal construction contribute to uncontrolled vibrational issues adverselyaffectingperformance. Peter says, Think of how singing in an open field compares with singing in a shower. Soundsmith has always challenged conventions, looking deeper into nuances of cartridge design that dramatically affect immediate andlong-termperformance. These have included extreme reductions of moving mass and the use of novel materials and designs. The new ES lineup is a continuation of that research and development.

Specifications

Type: Fixed Coil / Moving Iron
Mount: Standard
Stylus: Elliptical Titanium Bonded, 0.20 mm round
Radius of Curvature: 6 x 17 m
Cantilever: Aluminum Alloy
Recommended Tracking Force: 1.3 – 1.6 g Standard (Medium Compliance)
1.0 – 1.2 g (Special Order High Compliance)
Effective Tip Mass: 0.50 mg
Compliance: 22 m/mN (Medium Compliance)
28 m/mN (High Compliance)
Frequence Response: 20 – 20,000 Hz 2.5 dB
Channel Separation
@ 1000 Hz:
> 24 dB
N/A (Mono version)
Channel Separation
@ 50 – 15,000 Hz:
> 20 dB
N/A (Mono version)
Channel Difference: < 1.8 dB
< 1.0 dB (Mono version)
Output Voltage
@ 5cm/sec:
> 2.12 mV (HIGH)
DC Resistance (DCR): 680
Coil Inductance per channel: 190 mH
Suggested Preamp Gain: 38 – 44 dB
Cartridge Weight: 9.20 g (ES series)
Recommended Load Resistance: 47k
Recommended Load Capacitance: n/a

Shipping Info Standard Shipping
Cost: $25/Free Shipping We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.
Delivery Time: It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Related products