Audio Technica ATW-2192b Beige Wireless Headset
ATW-R2100b receiver and ATW-T210a body-pack transmitter with BP892cW-TH MicroSet omnidirectional condenser headworn microphone (beige). Includes element covers, windscreens and clothing clip.
Features:
- Serious advances in affordable professional wireless
- Clear sound quality and rock-solid, dependable performance
- Automatic frequency scanning
- 10 compatible user-switchable channels
- Antenna power available for powered antennas & other in-line RF devices
- True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
- Tone Lock tone squelch system fights interference
- Rugged metal half-rack receiver with soft-touch controls and LCD display
- Balanced XLR and unbalanced 1/4″ output jacks enable use with a wide variety of audio gear
- Switchable transmitter power output with high and low settings offered
- Includes rack-mount kit and detachable UHF antennas
- Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
Specifications:
- Operating Frequencies: Band I : 487.125 to 506.500 MHz
- Number of Channels: 10 total
- Modulation Mode: FM
- Maximum Deviation: 40 kHz
- Dynamic Range: > 110 dB (A-weighted), typical
- Total Harmonic Distortion: < 1% (at 1 kHz, 20 kHz deviation)
- Operating Range: 100 m (300′), typical
Open range environment with no interfering signals.
- Operating Temperature Range:
- 5 C to 45 C
- 41 F to 113 F
Battery and LCD performance may be reduced at very low temperatures.
- Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
Receiver Specifications:
- Receiving System: True diversity
- Image Rejection: 60 dB nominal, 55 dB minimum
- RF Sensitivity:
- 20 dBuV at 60 dB S/N ratio
- (50 ohms termination)
- Antenna Input:
- BNC-type, 50 ohms
- Bias voltage 12V DC, 60 mA, each
- Power Requirements: 12-18V DC, 500 mA
- Dimensions:
- 210.0 mm (8.27″) W x
- 162.2 mm (6.39″) D x
- 44.0 mm (1.73″) H
Not including BNC connectors or feet.
- Net Weight: 1.0 kg (35.3 oz), without accessories
- Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Addtional Receiver Specifications:
- Maximum Output Level:
- XLR, balanced: +9 dBV
- ” (6.3 mm), unbalanced: +4 dBV
- Balanced Audio Output Attenuator:
- Two position switch: 0 / -12 dB
Body-Pack Transmitter Specifications:
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Input Connections:Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST Input
- Pin 3: MIC Input
- Pin 4: DC Bias +9V
- Batteries: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
- Battery Life:
- High: 7 hours (alkaline)
- Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions:
- 66.0 mm (2.60″) W x
- 22.5 mm (0.89″) D x
- 92.3 mm (3.63″) H
Net Weight: 81 g (2.9 oz), without batteries
Handheld Transmitter Specifications:
RF Power Output: High:30 mW; Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Microphone Element: Dynamic cardioid
Batteries: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Battery Life:
- High: 7 hours (alkaline)
- Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Dimensions:
- 232.0 mm (9.13″) long
- 48.0 mm (1.89″) diameter
Net Weight: 252 g (8.9 oz), without batteries
Accessory Included: AT8456a Quiet-Flex stand clamp
Unconditional Satisfaction Guarantee
