Penn Elcom Cross 5 Ramp 15Deg 500mm for Cbl Cross
Cross 5 is more than just a crossover.Forged from high quality thermoplastic polyurethane (TPU), Cross 5 is a five channel crossover system that gives you unrivalled strength, abrasion resistance and flexibility, with New fire retardant technology.
Its ingenious design enables a wide variety of crossover combinations, whatever your cable management needs. The two elements that enable this system are the base section and the ramp section.
Half Base Section: The base sections acts as a connector piece, from which many combinations of cross over systems can be created.
Half Ramp Section: The ramp section has a 15 angle of inclination, the optimal angle for vehicles to drive over.
Features:
- Highly tear-proof and high form stability.
- Indented channel ridges to prevent the lid bowing under pressure.
- Resistant to most oils, fats and chemicals.
- Fire retardant (DIN EN 13501-1).
- Can withstand 5 tonnes of direct pressure.
- Coloured lids can be changed.
- Fixed lid in drive over position.
- Quick and easy assembly.
- Max Performance: anti-sliding pads available for hexagonal base.
Specifications:
Dimensions
Half Base Section
- Length: 500mm/ 19.5″
- Width: 370mm / 14.57″
- Width of x2 base pieces side by side: 800mm / 31.5″
- Height: 58mm / 2.28″
- Weight: 12kg/26.46lb
- Cable channels: width 40mm / 1.57″, height 44mm / 1.73″
Half Ramp Section
- Length: 500mm/ 19.5″
- Width: 230mm / 9.06″
- Height: 50mm / 1.97″
- Weight: 5kg/11.02lb
- Incline angle: 15
Wheelchair Section
- Length: 500mm/ 19.5″
- Width: 1.2m / 47″
- Height: 62mm / 2.44″
- Incline angle: 3.4 / 6%
Unconditional Satisfaction Guarantee
