ETC Desire D60 Studio Daylight LED Par

ETC Desire D60 Studio Daylight LED Par

The Desire D60 Studio Daylight LED Par delivers white-light output with sixty integrated 5600 K LEDs. Also, it offers three selectable LED options to match your specific colour temperature requirements.

The LED Par hosts a rugged die-cast construction and quiet fan cooling.

The fixture supports both console-controlled operation and standalone mode. It also uses advanced optics, including multiple lens options and the x7 Colour System, which provides five LED colours to fill spectral gaps in white-light output.

The Desire D60 Studio HD LED Par is available in black, silver or white.

Specifications:

• Source
• LED details-60 Lumileds LUXEON Rebel 2.5 W LED
• Max lumens-Studio Daylight: 8,216
• Lumens per watt-Studio Daylight: 57.0
• L70 Rating Hours to 70% output-50,000 hours
• Colour
• Colours used-Studio Daylight: White
• Colour temperature range-Studio Daylight: 3200 K
• Calibrated array-Studio Daylight: No
• Optical
• Beam angle range-8-71
• Gate size-N/A
• Aperture size-9 in
• Pattern projection-No
• Pattern size-N/A
• Camera flicker control/Hz range-Yes: 90025,000 Hz
• Notes-Secondary lenses available for multiple beam-spread options
• Control
• Input method-DMX512 via 5-pin XLR
• Protocols-DMX512/RDM
• RDM configuration-Yes
• UI type-LCD
• Local control-Yes
• Onboard pre-sets-Yes
• Onboard sequences-Yes
• Onboard effects-No
• Fixture-to-fixture control-Yes
• Notes-15-bit virtual dimming engine
• Electrical
• Voltage range-100240 VAC 50/60 Hz
• Input method-Neutrik powerCON in and thru / Requires power from non-dimmable source
• Inrush-
• 15 A at 120 V (First half-cycle)
• 40 A at 240 V (First half-cycle)
• Fixtures per circuit (Note: All measurements are for 120 V, 60 Hz. Results may vary in different regions.)-9 (15 A via power thru connector)
• Wattage typical-161 W
• Current draw-
• 1.43 A / 120 V
• 0.58 A / 240 V
• Thermal
• Ambient operating temp--2040 C (4104 F)
• Fan (controllable)-Yes (yes)
• Droop compensation-Yes
• dB range-25 dBa average at 1 m
• BTUs/hour-549
• Physical
• Materials-Die-cast, all metal housing
• Colour options-Black
• Mounting options-Yoke
• IP rating-IP20
• Weight-8.7 kg (19.1 lb)
• Included accessories-Very Narrow Round diffuser, power cable (see page 7), optional yoke/floor stand
• Warranty
• Fixture-5 years
• LED array-10 years
• Regulatory and Compliance
• Approved regulatory standards
• UL 1573
• CSA C22.2 No. 166
• CE Compliant
• EAC Compliant