ETC Desire D40XTI Lustr+ LED Par

ETC Desire D40XTI Lustr+ LED Par

The Desire D40XTI Lustr+ LED PAR delivers colour control with the x7 Colour System, offering the industry’s most complete range of spectrally-balanced saturated and tinted colours.

This fixture features an IP66 rating for reliable indoor or outdoor mounting, a rugged die-cast enclosure, silent fan-free operation, and the ability to swap lens options on-site to match your specific application.

This is the install specific version of the ETC Desire D40XT Lustr+ LED Par.

The ETC Desire D40XTI Lustr+ LED Par is available in black, silver, and white.

Features:

• Easy setup via any RDM device such as ETC Gateways and Gadget
• 40 LED variable colour-mixing light wash fixture (colour mixing fixtures)
• 40 LED white-light wash fixture (static white fixtures)
• ETL listed to UL1598
• IP66-rated for exterior wet location use
• Data termination board for easy installation (included)

Specifications:

• General:
  • Easy setup via any RDM device such as ETC Gateways and Gadget
  • 40 LED variable colour-mixing light wash fixture (colour mixing fixtures)
  • 40 LED white-light wash fixture (static white fixtures)
  • ETL listed to UL1598
  • IP66-rated for exterior wet location use
  • Data termination board for easy installation (included)
• Physical:
  • Rugged die-cast all-metal housing
  • Accessory ring for installation of secondary lenses
  • Available in black
  • Hanging yoke standard.
  • Effective Projected Area (EPA): 0.74
• Electrical:
  • 100VAC to 240VAC 50/60 Hz universal power input
  • Waterproof, 39 outdoor rated power lead
  • Up to 10 fixtures (15A max) may be fed on the same circuit
  • Requires power from a non-dim source
• LED:
  • 50,000 hour LED life (50,000 hours to 70% intensity)
  • 40 Luxeon Rebel LED emitters
  • Studio Daylight and Studio Tungsten use Rebel ES white light emitters for higher output
• Colour:
  • Exclusive x7 Colour System seven-colour LED array
  • Broad spectrum colour interacts seamlessly with conventional sources
  • Beautifully illuminates skin tones and other objects for natural appearance and high colour rendering
  • Exclusive red-shift option emulates tungsten dimming performance (not available on static white fixtures)
  • Studio HD array uses warm and cool white light emitters with additional deep colour emitters
  • Studio Tungsten and Studio Daylight provide good colour rendering at very high brightness
• Optical:
  • Primary field angle of 17 and beam angle of 8
  • Secondary lenses available for multiple beam spread options
  • Lenses must be ordered separately
  • Refer to accessories chart for lenses available
• Control:
  • DMX512 in and thru via termination board (included)
  • See DMX Control Table for operation modes
  • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes colour shift during dimming
  • RDM functionality for address and setting changes
• Thermal:
  • Ambient operating temperature of -4 to 104F (-20 to 40C)
  • Active electronic thermal management for droop-free operation
  • Noiseless, fan-free convection cooling for acoustically sensitive installations
  • Fixture is designed for continuous operation up to 104F (40C) ambient temperature and requires free flow of air around fixture housing.