ETC Desire D40XT Studio Tungsten LED Par

ETC Desire D40XT Studio Tungsten LED Par

The Desire D40XT Studio Tungsten LED Par delivers balanced illumination with forty 3000K LEDs housed in a rugged, IP66-rated die-cast enclosure.

This fixture combines sealed, watertight construction with silent operation, no fan cooling. It also gives you the choice of multiple lens options and control via console integration or standalone mode.

The Desire D40XT Studio Tungsten LED Par is available in black, silver or white.

Specifications:

• Source:
  • LED details: 40 Lumileds LUXEON Rebel LED
  • Max lumens: Studio Tungsten: 5,023
  • Lumens: Studio Tungsten: 52.8
  • L70 rating (hours to 70% output): 50,000 hours
• Colour:
  • Colours used: Studio Tungsten: White
  • Colour temperature range: Studio Tungsten: 5600 K
  • Calibrated array: Studio Tungsten: No
  • Red shift: Yes
• Optical:
  • Beam angle range: 871
  • Aperture size: 7.5 in
  • Pattern projection: No
  • Pattern size: N/A
  • Camera flicker control/Hz range: Yes: 90025,000 Hz
  • Notes:
    • Secondary lenses available for multiple beam-spread options
    • Sealed, factory-installed lenses available for permanent installations
• Control:
  • Input method: DMX512 via watertight 5-pin XLR
  • Protocols: DMX512/RDM
  • Modes (footprint): See page 5
  • RDM configuration: Yes
  • UI type: LCD
  • Local control: Yes
  • Onboard pre-sets: Yes
  • Onboard sequences: Yes
  • Onboard effects: No
  • Fixture-to-fixture control: Yes
  • Notes: 15-bit virtual dimming engine
• Electrical:
  • Voltage range: 100240 VAC 50/60 Hz
  • Input method: Waterproof, 39 in power in and thru Requires power from non-dimmable source
  • Inrush:
    • 15 A at 120 V (First half-cycle)
    • 40 A at 240 V (First half-cycle)
  • Fixtures per circuit (Note: All measurements are for 120 V, 60 Hz. Results may vary in different regions.): 10 (15 A may be fed on same circuit)
  • Wattage typical: 110
  • Current draw: 1/0.5 A
• Thermal:
  • Ambient operating temp: -2040 C (-4104 F)
  • Fan (controllable): No
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 375.32
• Physical:
  • Materials: Die-cast, all metal housing
  • Colour options: Black
  • IP rating: IP66 for exterior, wet location use
  • Weight: 6.4 kg (14 lb)
  • Included accessories: Hanging yoke, optional yoke/floor stand
• Warranty:
  • Fixture: 5 years
  • LED array: 10 years
• Regulatory and Compliance:
  • Approved regulatory standards- :
    • cETLus Listed
    • Conforms to UL1598
    • Certified to CSA C22.2 No. 250.0
    • CE Compliant