ADJ American DJ Mega Bar 50RGB RC LED Wash Light with Remote
Need uplights? Get the job done right with American DJ’s Mega Bar 50RGB RC, a compact, 22″ LED lighting bar with full RGB color mixing.Forego hands-on adjustments and DMX controllers by using the includedIR wireless remote control for quick, one button changes. Just aim yourremote at the light and easily control a plethora of features such asRGB color change, flash, blackout, built-in programs and DMXaddressing. If don’t want to worry about gear or you forget to bringthe remote or DMX controller, you can always change the settingsmanually using the 4-button LED display on the back of the unit.
The Mega Bar 50RGB RC uses LEDs rated to last through 100,000 hours ofuse with a maximum power draw of 18W, no duty cycles required. Use lesspower outlets by daisy-chaining power from one unit to the next withthe IEC power Ins/Outs.
Features/Specifications:
- 1.5 foot/.5 meter ultra bright, indoor LED Color Bar with 125,10mm LEDs (24 Red, 54 Green, & 47 Blue LEDs)
- Includes wireless infrared remote control up to 30 ft./10M(Model: ADJ LED RC)
- 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 & 7 channel modes
- 7 Operational modes: Manual Color Mode; Color Change Mode; ColorFade Mode; Auto (Program Run) Mode; Sound Active Mode; RGB ManualControl Mode and DMX-512 Mode
- Great as an architectural wall wash or for performance stageswhere traditional stage lighting emit a lot of heat onto performers
- Smooth RGB color mixing (fast or slow color change operation)
- 32 built-in Color Macros
- Color strobe effect
- DMX-512 Protocol
- Electronic Dimming: 0 – 100%
- Beam angle: 40-degree
- Linkable via 3-pin XLR cable
- 4-button LED display on rear panel
- IEC AC outlet on rear to daisy chain power
- Includes mounting brackets
- Long life LED (Rated at 50,000 hrs.)
- Low power consumption
- Very low heat output
- Run all night No duty cycle
- Multi-voltage: 90-240V, 50/60Hz
- Power Draw: 18W max
- Dimensions (LxWxH): 22″ x 2.5″ x 4″ / 560x63x102mm
- Weight: 3 lbs. / 1.5 kg.
ADJ LED RC Infrared Remote Control Features:
- Black Out: Turns fixture On/Off
- Auto Run: Automatically run through built-in programs
- Program Selection: Access units built-in programs
- Flash: Strobe effect
- Speed: Control speed of Auto Run
- Sound Active: Activates sound active mode
- Slave: Designates the fixture as a “slave” fixture in theMaster/Slave configuration
- Set Address: Set DMX Address on a fixture
- RGB Buttons: Adjust RGB colors with the “+” and “-” buttons
- + and Buttons: Adjust flash rate, speed of the Auto Run andProgram Selection
Unconditional Satisfaction Guarantee
