50% OFF! Hot items selling fast—Grab them before they're gone!

Martin JEM Roadie Compact DMX Dense Fog Machine

$146.00 $6.00

  • Unconditional Satisfaction Guarantee
  • No Shipping Fees Above 30
  • 2 Months to Decide. Returns Simplified.
SKU: MVK600342077

Martin JEM Roadie Compact DMX Dense Fog Machine

Martin’s industry-standard Jem Roadie X-Stream is now available in a high-output, compact version.

Features:

  • Onboard DMX, 3 and 5 pin
  • Pre-programmed stand-alone macros
  • On-board control panel
  • For vertical or horizontal effect projection
  • Output and density level control
  • Continuous output
  • 2500 m/min fog output Integrated high velocity fan
  • 2 x 1500 W heat exchanger
  • 9 min heat-up time
  • 9.5 liter fluid capacity
  • Low fluid sensing

Specifications:

Performance

  • Max. fog output (approx.): 2500 m3 per minute
  • Max. operating time at full output (approx.): 90 minutes
  • Operating time: Continuous, automatic level adjustment
  • Warm-up time (approx.): 9 minutes

Control and Programming

  • Control options: Onboard control panel, DMX
  • Compatible remote controls: For limited control
  • DMX channels: 2 (output and fan)
  • Protocol: USITT DMX512/1990

Construction

  • Housing: Steel and aluminum
  • Heat exchanger: 2 x 1500 W, direct thermal protection

Fluid System

  • Fluid pump: Oscillating piston, high pressure X2
  • Onboard fluid capacity: 9.5 l
  • Fluid consumption at peak output: 220 ml per minute

Installation

  • Orientation: Floor mount (Horizontal or vertical) or flying kit

Connections

  • Remote control: 3-pin locking XLR
  • DMX data: 3-pin and 5-pin XLR sockets
  • Power cable entry: Hard-wired

Electrical

  • AC power: 208 V 60 Hz / 220 – 240 V 50 Hz
  • Main fuse (208-240 V power): Onboard 16 A Breaker

Typical Power and Current

  • 208 V, 60 Hz: 2450 W, 12.7 A
  • 220 V, 50 Hz: 2745 W, 12.5 A
  • 230 V, 50 Hz: 3000 W, 13.04 A
  • 240 V, 50 Hz: 3267 W, 13.6 A
  • Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal

  • Maximum ambient temperature (Ta max.): 40 C
  • Exterior surface temperature, steady state: 50 C
  • Max. nozzle temperature: 200 C

Includes:

  • User manual
  • Container 9.5 l
  • Hard wired mains cable 2 m: Pre-Installed
  • Flying kit: Pre-Installed

Physical

  • Length: 800 mm
  • Width: 500 mm
  • Height: 600 mm
  • Dry weight: 80 kg

Shipping Info Standard Shipping
Cost: $25/Free Shipping We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.
Delivery Time: It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Related products