Martin JEM Roadie X-Stream DMX Dense Fog Machine

Martin JEM Roadie X-Stream DMX Dense Fog Machine

The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense “white-out” of fog.

Features:

• Onboard DMX
• On-board control panel
• Optional hand-held remote control
• For vertical or horizontal effect projection
• Output and density level control
• Continuous output
• 5000 m/min fog output Integrated high velocity fan
• 2 x 2500 W heat exchanger
• 18 min heat-up time
• 2 x 9.5 liter fluid capacity
• Low fluid sensing

Specifications:

Performance

• Max. fog output (approx.): 5000 m3 per minute
• Max. operating time at full output (approx.): 108 minutes
• Operating time: Continuous, automatic level adjustment
• Warm-up time (approx.): 18 minutes

Control and Programming

• Control options: Onboard control panel, DMX
• Compatible remote controls: For limited control
• DMX channels: 2 (output and fan)
• Protocol: USITT DMX512/1990

Construction

• Housing: Steel and aluminum
• Heat exchanger: 2 x 2500 W, direct thermal protection

Fluid System

• Fluid pump: Oscillating piston, high pressure X4
• Onboard fluid capacity: 2 x 9.5 l
• Fluid consumption at peak output: 500 ml per minute

Installation

• Orientation: Floor or flying kit

Connections

• Remote control: 3-pin locking XLR
• DMX data: 3-pin locking XLR
• Power cable entry: IEC-EN60309-2 Socket (Cee Type)

Electrical

• AC power: 208 V 60 Hz / 220 – 240 V 50 Hz
• Main fuse (208-240 V power): Onboard 25 A Breaker
• Typical Power and Current
• 220 V, 50 Hz: 4327 W, 19.66 A
• 230 V, 50 Hz: 4729 W, 20.56 A
• 240 V, 50 Hz: 5150 W, 22.4 A
• Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

Thermal

• Maximum ambient temperature (Ta max.): 40 C
• Exterior surface temperature, steady state: 50 C
• Max. nozzle temperature: 200 C

Physical

• Length: 1140 mm
• Width: 645 mm
• Height: 655 mm
• Dry weight: 167 kg