Martin RUSH Wizard DMX Barrel Scan Effect Light

Martin RUSH Wizard DMX Barrel Scan Effect Light

The RUSH Wizard is the iconic Martin Wizard Extreme re-energized: lighter, brighter, more compact and even more energy-efficient. This music triggered and DMX-Controllable “full-house” effect light, features extraordinary bright and magical effects. It features a color wheel with seven colors and a gobo wheel with 15 unique designs, as well as a shutter for strobe and pulse effects. The Wizard delivers more than 80 agile light beams, each beam chasing the other while continuously changing color and gobo patterns.

• More than 80 magical beams
• 15 gobos and 7 colors for a large variety of dance floor looks
• Unique twinkle animation effect

Features:

• 130 W short-arc discharge lamp with reflector
• 15 gobos plus open
• More than 80 magical light beams
• 7 colors + 2 open
• Shutter: Strobe effect, pulse effects, instant open and blackout
• Adjustable focus
• DMX or stand-alone mode
• Flexible mounting bracket for floor stand, wall or overhead mounting

Specifications:

Physical

• Length: 447 mm
• Width: 500 mm
• Height: 195 mm
• Weight: 9.3 kg including bracket

Lamp

• Type: 130 W short-arc discharge with reflector
• Color temperature: 8800 K
• Average lifetime: 6000 hours – Manufacturers figure

Dynamic Effects

• Motorized rotating parabolic mirror dish
• Motorized mirror drum: 180 pan (swivel) and 360 tilt (continuous rotation)
• Color / animation wheel: 7 colors plus 2 x open, twinkle animation effect
• Gobo wheel: 13 gobos + open, wheel scrolling and continuous rotation, shake effect
• Shutter: 0 – 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout
• Pre-programmed effects: Full range of macro effects

Control and Programming

• Control options: DMX, stand-alone, master/slave
• DMX channels: 10
• Stand-alone trigger options: Music trig, auto trig
• Music trig also settable via DMX
• Setting and addressing: Control panel with backlit LCD display
• Protocol: USITT DMX512/1990
• Firmware update: Serial upload via DMX link

Optics

• Manual focus: 2 m – 20 m

Construction

• Housing: High-impact flame-retardant thermoplastic
• Color(s): Black
• Protection rating: IP20

Installation

• Mounting points: Adjustable bracket
• Orientation: Any
• Location: Indoor use only, must be fastened to surface or structure
• Minimum distance to illuminated surfaces: 0.5 m
• Minimum distance to combustible materials: 0.3 m
• Minimum clearance around fan and air vents: 0.3 m

Connections

• AC power in/thru: Neutrik PowerCon
• DMX data in/out: 5-pin locking XLR

Electrical

• AC power: 100-240 V nominal, 50/60 Hz
• Typical total power consumption: 200 W
• Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current

• 110 V, 60 Hz: 1.9 A, 200 W, PF 0.99
• 230 V, 50 Hz: 0.9 A, 196 W, PF 0.95
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

• Cooling: Forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 40 C
• Minimum ambient temperature: 0 C
• Total heat dissipation (calculated, +/- 10%): 685 BTU/hr.

Approvals

• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety: UL 1573
• US EMC: FCC Part 15 Class A
• Canadian safety: CSA C22.2 No. 166
• Canadian EMC: ICES-003 Class A
• Australia/NZ: C-TICK N4241

Included Items

• Lamp (installed)
• Mounting bracket
• Power cable, 1.5 m, without mains plug