Mackie C300 12-Inch 2-Way Passive Speaker

Mackie C300 12-Inch 2-Way Passive Speaker

C-Series loudspeakers are an excellent choice just about anywhere you can place them. Build the dream PA for your band with a pair of C-Series speakers and a PPM Series Powered Mixer or integrate them into an existing system. Add on a few more and an FRS Series amplifier for an impressive floor monitor setup. Since they are fully flyable, the C-Series is perfect for install systems like a small sanctuary, youth room, bars and small clubs.

Features:

• 2-way portable Precision Passive loudspeaker system
• 750W / 300W RMS peak power handling at 8?
• 12″ long-throw low-frequency transducer with 3″ voice coil
• High-output 1.75″ titanium compression driver
• Ultra-wide, smooth dispersion via multi-cell horn aperture and constant directivity horn
• Integrated Low Impedance Compensated Crossover (LICC) with full driver protection
• Lightweight for ultimate portability (46 lb / 20.9 kg)
• Asymmetrical trapezoidal cabinet for floor monitor positioning
• Stand / Pole-mountable
• Flyable via ten M10 rigging points using the optional eyebolt kit

Specifications:

Acoustic Performance

• Frequency Response (- 3dB): 55 Hz – 18 kHz
• Frequency Range (-10 dB): 45 Hz – 20 kHz
• Max SPL long-term: 123 dB @ 1 m
• Low-Frequency Crossover Type: 24 dB / octave, time offset corrected
• High-Frequency Crossover type: 24 dB / octave
• Crossover Point: 1800 Hz

Audio

• Input / Thru Connector Type:
• Speakon-Style NL-4 jack
• 1/4″ TS jack
• Input Impedance: 8 ?
• Power Handling:
• RMS: 300 watts
• Music: 500 watts
• Peak: 750 watts

Low-Frequency Transducer

• Diameter: 23 in / 300 mm
• Voice Coil Diameter: 3 in / 75 mm
• Magnet Material: Ferrite

High-Frequency Transducer

• Diaphragm Diameter: 1.75 in / 44.5 mm
• Diaphragm Material: Heat treated titanium
• Horn Exit Diameter: 1 in / 24.5 mm

Horn Design

• Type: Conical and Exponential
• Mouth Size: 12 in / 305 mm (W) x 7 in / 178 mm (H)
• Horizontal Coverage: 90 (1 kHz – 20 kHz)
• Vertical Coverage: 45 (2.8 kHz – 20 kHz)

Safety Features

• Over-Excursion Protection: Second-order high-pass filter
• Driver Protection: Dynamic protection for compression driver

Construction Features:

• Basic Design: Asymmetrical Trapezoidal
• Material: Polypropylene
• Finish: Black, textured finish
• Handles: Once on each side, one on top
• Grille: Perforated metak with weather-resistant coating
• Operating Temperature Range:
• -10C to 45C
• 14F to 113F

Physical Properties (packaged product)

• Height: 26.5 in / 673 mm
• Width: 16.8 in / 427 mm
• Depth: 15.5 in / 394 mm
• Shipping Weight: 52.0 lb / 23.6kg

Physical Properties(product)

• Height: 26.1 in / 663 mm
• Width: 16.0 in / 406 mm
• Depth: 14.8 / 376 mm
• Net Weight: 46.0 lb / 20.9 kg

Mounting Methods

• Floor mount, pole mount, or fly via 10 integrated M10 threaded inserts (two each located on each side, top, bottom and rear of enclosure)

Options

• PA-A1 forged shoulder eyebolt kit (4 x M10 X 1.5 mm x 20 mm) P/N 0031943
• SPM200 Loudspeaker Pole Mount: P/N 2035170-01

Ordering Information

• C300z Passive, 2-way Loudspeaker: P/N 2033793
• C300z Passive, 2-way Loudspeaker, CN: P/N 2033793-05