Martin VDO Fenix 6 mm LED Video Panel

Martin VDO Fenix 6 mm LED Video Panel

The VDO Fenix 6 is the first in the family of touring-friendly outdoor LED video panels with 6 mm pixel pitch and full cross-rental compatibility. The robust and ergonomic frame eliminates the need to use an add-on touring frame and allows for fast and easy build-up of LED video walls. VDO Fenix 6 is driven by the award-winning Martin P3 System Controller family that also controls Martin’s creative LED video products, ensuring bright and optimal image quality in a variety of outdoor (and indoor) rental applications. All panels leaving our factory in Denmark are calibrated to match existing panels, making them highly cross-rentable.

Features:

• Robust and touring-friendly – ready to tour straight from the box
• 6 mm pixel pitch
• 576 x 576mm panel
• Robust casted frame with “touring-ready” mechanics
• Approx. 36 kg per SQM
• Bright for outdoor use
• 48 bit per pixel processing
• PowerCON True-1 Power In and True connector (200-240V)
• Easy to assemble and configure – requires just one person
• Fully calibrated for optimal image quality and full cross-rental compatibility

Specifications:

Control/User Interface

• Device status: Multicolor status LED
• Device test and reset: Pushbutton to call up local test patterns and reset device

Photometric Data

• Pitch (pixel center-to-center): 6.857 mm
• Total output (max.): 5500 Nit (calibrated
• Color resolution: 16 bits per color (48 bit per pixel)
• Resolution, one panel: 84 x 84 pixels
• Pixels per panel: 7056
• Color and intensity calibration: Pixel-level

Video Processing

• Video signal processor: Martin P3-100, P3-200, P3-300 or P3-PC System Controller
• System processing depth: 16 bits per color (48 bit per pixel)
• Refresh rate: 10 500 Hz
• Calibration: Per-pixel color and brightness, stored inside each LED block for easy service
• System latency: Progressive 1 frame, Interlaced 3 frames
• Latency between first and last panel: None
• Frame synchronization to analog signal or genlock: Yes, integrated in P3 System Controller
• Image rotation: Yes, integrated in P3 System Controller
• Scaling: Yes, integrated in P3 System Controller
• De-interlacing: Yes, integrated in P3 System Controller
• Gamma curve selection and adjustment: Yes, integrated in P3 System Controller
• Real-time panel content remapping: Yes, integrated in P3 System Controller
• Color temperature control: Yes, integrated in P3 System Controller
• Color space control: Yes, integrated in P3 System Controller

P3 Signal Protocol

• Signal type: Gigabit Ethernet
• Protocol: Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, CAT 5e or better
• Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

Construction

• Panel frames: Aluminum
• LED modules per panel: 14
• Color: Matt black
• Protection rating: IP65

Installation

• Orientation: Any
• Rigging: Individual panel via standard truss clamps, full column(s) via header hardware
• Max. suspended in one column: 21 VDO Fenix family panels
• Panel interlocking: Quick-release mounting system, single-person operation

Connections

• Power input: Neutrik PowerCON TRUE 1
• Data input: IP65-rated Gigabit Ethernet connector
• Power thru: Neutrik PowerCON TRUE 1
• Data thru: IP65-rated Gigabit Ethernet connector

Electrical

• AC power: 200-240 V nominal, 50/60 Hz
• Power supply unit: Integrated, auto-sensing multi-voltage
• Peak power consumption (at full intensity, full white): 250 W
• Typical power consumption (with typical video content): 85 W
• Figures for typical video content are indicative only and will vary

Thermal

• Cooling: Convection
• Maximum ambient temperature (at full intensity, full white): 40 C (104 F)
• Minimum ambient temperature (Ta min.): 0 C (32 F)

Physical

• Height: 576 mm (22.7 in.)
• Depth: 100 mm (4 in.)
• Weight: 12.4 kg (27.4 lb.)
• Width: 576 mm (22.7 in.)