Riedel C44 Artist Beltpack Master Station

Riedel C44 Artist Beltpack Master Station

This system interface allows for seamless integration of digital partylines in matrix intercom environments. It converts four two-channel CAT 5 matrix ports to four phantom powered beltpack lines. The beltpacks are connected to the C44 via standard 3 pin XLR cables. Up to 16 beltpacks can be daisy-chained on each line; one C44 can power up to 38 beltpacks. For stand-alone use the device features an integrated 2424 ports digital intercom matrix, which can be configured via Riedels audio assignment software. Pre-programmed configurations can be loaded via DIP switches on the front. Full digital interfacing is provided for Artist and Performer 32 matrix systems. Analog 4-wire I/Os and GPIs are provided for interfacing to 3rd party intercom systems. The C44 provides short-circuit protection on each powered line individually. Separate DC inputs and outputs at the rear of the unit can be used to provide redundant power.

Specifications:

• Power Supply:
  • Output voltage: +48V DC 5%
  • Output current: 3 A max.total
  • Short circuit protection: per individual line
  • Short circuit reset time: 500 ms
  • Power requirements: 85 265 V AC / 47 63 Hz
  • Power consumption: 170 VA with full load (38 x C3)
• Max. Distance / Cable Type:
  • Cable type C44 to matrix: CAT5 FTP, 4×2 AWG24
  • Cable type Partyline: XLR Microphone cable
  • Between any two Performer devices: up to 300 m (1000 ft)
  • Max. partyline length: 2.5 km (1.5 miles)
• Dimensions:
  • H x W x D: 44 (1 RU) x 483 x 242 mm
  • Mass: 3550 g (7.82 lb)