Allen & Heath AH-DT164-W 16 Input x 4 Output Dante Audio Expander Wall Box – 48kHz / 96kHz

Allen & Heath AH-DT164-W 16 Input x 4 Output Dante Audio Expander Wall Box – 48 KiloHertz / KiloHertz

DT164-W provides 16 microphone preamps and 4 line outputs in a versatile wall-mount design for permanent installation.

Features:

• Dante audio expander (96kHz / 48kHz)
• Wall mount or dip trap installation
• 16 mic preamps on XLR with Phantom Power status LEDs
• 4 XLR Line Outs
• Primary and Secondary Dante ports with locking EtherCon
• Redundant or Switched mode
• Direct preamp control from dLive, Avantis, AHM-64 and SQ
• Dante Domain Manager ready
• Remote control of preamps via DT Preamp Control software for integration with 3rd party systems
• 3 power supply options: 100-230V AC powered on IEC or screw terminal blocks, as well as 12V DC power DC power can be used as redundant power supply
• Can fit in a standard NEMA box (custom brackets required)
• Compatible with ACE Backstage 174SLBK stage pocket system
• AES67 compatible

Specifications:

• Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
• Mic/Line Preamp: Fully recallable
• Input Sensitivity: -60 to +15dBu
• Analogue Gain: +5 to +60dB, 1dB steps
• Pad: -20dB Active PAD
• Maximum Input Level: +30dBu (PAD in)
• Input Impedance: >4k (Pad out), >10k (Pad in)
• Mic EIN: -127dB with 150 source
• Analogue XLR Outputs: Balanced, Relay protected
• Output Impedance: <75
• Nominal Output: +4dBu = 0dB meter reading
• Maximum Output Level: +22dBu
• Residual Output Noise:
  • -92dBu (muted, 20-20kHz)
  • -90dBu (muted, 20-40kHz)
• Dante:
  • Sample rate: 48kHz or 96kHz
  • Bit Depth: 24 Bit
  • Gain, Pad, 48v Control: Allen & Heath dLive, Avantis, AHM-64 or SQ system
• Operating Temperature Range: 0C to 40C (32F to 104F)
• Power:
  • Mains Voltage Operating Range: 100-240V AC, 50/60Hz
  • Mains Power Consumption: 40W max
  • DC Input: 12V DC, 3A max
• Dimensions and Weight (Width x Depth x Height x Weight): 210 x 87 x 210 mm x 3.2kg (8.25 x 3.5 x 8.25 x 7lbs)