Clear-Com CC-110-X7 Single Ear Headset XLR (F) 7-Pin with Dynamic Microphone
The CC-110-X7 features a dynamic cardioid microphone offering rejection of off-axis sounds generated from the back and sides in noisy environments. The X7 designation means this headset arrives with a 7-pin female XLR connector. The integrated temple pad and adjustable headband were designed to provide comfort during long periods of use. This light-weight single-ear closed-back headset comes with a removable cable allowing for quick connector changes or in the field repairs. For convenience, the CC-110s flexible boom arm acts as an on/off mute by simply moving the arm up or down. The boom arm can also be rotated so users can wear the headset on the left or right side for flexibility. Leatherette and foam earpads can be tailored to the user’s earcup situation and comfort level.
Features:
- Light-weight
- Cardioid microphone for off axis rejection
- Closed-back over-ear design provides isolation
- flexible mic boom arm
- Interchangeable cable
- Boom arm acts as an on/off mute switch
- Comes with both leatherette and foam earpads
Specifications:
- Headphone:
- Type: Closed-back
- Driver: 36mm diameter, neodymium magnet, copper-clad aluminum wire voice coil
- Frequency Response: 20Hz v- 20kHz
- Microphone:
- Element: Dynamic
- Driver: 15mm, neodymium magnet
- Polar Pattern: Cardioid
- Frequency Response: 250Hz 20kHz
- Sensitivity
- Open Circuit Sensitivity: -64 dB 3.5 dB; at 1kHz, typical
- 99 dB 3 dB (SPL); at 1kHz typical
- Power: 500mW Maximum
- Connector: Cable: 5ft (1.55m) long with 8-pin connector at headset end; 7-pin female XLR
- Impedance: 400 ohms 30%; at 1kHz typical
- Dimensions:
- Packaging for CC-110:
- 6.7 x 8 x 3.5 in (WxHxD)
- (170 x 205 x 90 mm)
- Weight: 5.1 oz (145g) without 8-pin cable assembly and M3*18mm SCREW
Unconditional Satisfaction Guarantee
