JBL CBT 50LA-1-WH Compact Line Array Column Speaker – White

JBL CBT 50LA-1-WH Compact Line Array Column Speaker – White

The CBT 50LA-1, featuring Constant Beamwidth Technology, represents a breakthrough in pattern control. Utilizing analog delay beam-forming and amplitude tapering, it achieves consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

Features:

• Patent-pending Constant Beamwidth Technology provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
• Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
• Dynamic SonicGuard overload protection
• Built-in 70V/100V transformer, plus 8 ohm direct capability.
• Swivel (pan) / tilt wall bracket included.

Specifications:

• Drivers: Eight 50 mm (2 in) Full-Range
• Frequency Range (-10dB): 80 Hz 20 kHz
• Coverage Angle:
  • Vertical: 20 (1.5 kHz – 16 kHz, 10)
  • Horizontal: 150 (average, 1 kHz 4 kHz, 20)
• Sensitivity:
  • 93 dB (speech mode, 2 kHz – 14 kHz)
  • 89 dB (music mode, 300 Hz – 18 kHz)
• Impedance: 8 ohms
• Power Rating:
  • 150W (600W peak), 2 hrs
  • 100W (400W peak), 100 hrs
• Maximum SPL (1m):
  • Speech mode: 115 dB continuous average (121 dB peak)
  • Music mode: 111 dB continuous average (117 dB peak)
• Transformer Taps: 60W, 30W, 15W, (7.5W at 70V only), and 8 through, via switch
• Enclosure: Fiberglass reinforced ABS cabinet, painted aluminum grille
• Outdoor Capability: IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture, and 200-hr ASTM G85 acid-air/salt-spray resistant.
• Color: White (-WH)
• Insert Points: Ten M6 insert points on back panel
• Mounting:
  • Included swivel (pan) / tilt wall bracket provides continuously variable 80 degree left-right swivel aiming (at no up/down tilt see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable 15 degree tilt, as well as 5 degree fixed increment points within the range.
  • Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
• Dimensions (H x W x D): 528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in)
• Net Weight: 4.1 kg (9.0 lb)
• Included Accessories: Swivel (pan) / tilt wall bracket
• Optional Accessories:
  • MTC-PC2 terminal panel cover
  • MTC-CBT-FM1 flush-mount low-profile wall-mount bracket
  • MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand