Shure MX202BP/MS Mini-Condenser Microphone – Mini Shotgun Cartridge – TQG Connector – Preamp – Black

Shure MX202BP/MS Mini-Condenser Microphone – Mini Shotgun Cartridge – TQG Connector – Preamplifier – Black

Shures MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid, supercardioid, or mini-shotgun condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable. Its hard to believe that such small, unobtrusive microphones can produce such great sound, but it’s true. Available with plate mount preamps.

Features:

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Balanced, transformerless output for increased immunity to noise over long cable runs
• Black finish that blends unobtrusively with surroundings
• Preamp offers easy installation in ceilings or microphone stands

Specifications:

• Type: Electret Condenser
• Frequency Response: 5017000 Hz
• Polar Pattern: Mini-shotgun
• Output Impedance: 180
• Output Configuration: Active Balanced
• Sensitivity @ 1 kHz, open circuit voltage: -33 dBV/Pa (22 mV), 1 Pa=94 dB SPL
• Maximum SPL, 1 kHz at 1% THD, 1 k load: 121 dB
• Self Noise, A-weighted: 26 dB SPL
• Signal-to-Noise Ratio, Ref. 94 dB SPL at 1 kHz: 68 dB
• Dynamic Range, 1 k load, @ 1 kHz: 96 dB
• Common Mode Rejection: 10 Hz to 100 kHz, 45 dB, minimum
• Clipping Level at 1% THD: 6 dBV (0.5 V)
• Polarity: 3-pin XLR – Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
• Environmental Conditions:
  • Operating Temperature: 1857C (0135F)
  • Storage Temperature: 2974C (20165F)
  • Relative Humidity: 095%
• Power Requirements: Phantom Power, 1152 V DC, 2.0 mA