ATW-R250 receiver and ATW-T202 handheld microphone/transmitter.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.
Features:
- Easy operation and clear, natural sound quality
- Reliable performance and durable construction
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, 1/4″ output jack and space-saving power supply
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
- Professional locking connector on UniPak body-pack transmitter
RECEIVER SPECIFICATIONS
- Receiving System – Non-diversity, single-channel, dual antenna system
- Image Rejection – 50 dB minimum
- Signal-to-noise Ratio – 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz
- Sensitivity – 20 dBV for 60 dB S/N (IEC-weighted)
- Audio Output – 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load)
- Output Connector – 1/4″ TS (“mono”) phone jack
- Power Supply – 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply
- Dimensions – 7.48″ W x 1.65″ H x 5.12″ D
- Net Weight – 11.0 oz (311 g)
- Accessory Included – Power supply
HANDHELD TRANSMITTER SPECIFICATIONS
- RF Power Output – 10 mW High position, 2 mW Low position, typical
- Spurious Emissions – Under federal regulations
- Microphone Element – Dynamic unidirectional
- Battery – 9V (NEDA type 1604) alkaline, not included
- Current Consumption – 30 mA typical
- Battery Life – Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern)
- Dimensions – 9.50″ long, 2.10″ maximum diameter
- Net Weight – 12.7 oz (360 g) (without battery)
- Accessory Included – AT8456a Quiet-Flex stand clamp
Unconditional Satisfaction Guarantee
