Clay Paky Scenius Spot Arc Moving Light

Clay Paky Scenius Spot Arc Moving Light

Sold in sets of 6

Scenius is the new moving head spotlight at the top of the Clay Paky range. Its advanced optical unit and the new 1400W OSRAM discharge lamp provide a much higher light output than with previous generation 1500W lamps. Thanks to its wide 8-48 zoom, Scenius is perfect for every use. A modern focus tracking system concentrates maximum luminous efficiency precisely on the effect you wish to project, and the focus may be set to be fully automatic. With Scenius you have a light in your hands whose white light and color reproduction fidelity will completely amaze you. The fixture produces a 6500 K output color temperature that does not vary over time; also, Scenius can count on a very high CRI, which is extremely unusual for a metal halide light source. The colors cover a broad spectrum, even including pastel shades, thanks to a CMY system, a 7-color wheel and a linear CTO filter. The special effects are of course top-ranking: 2 rotating gobo wheels, each with 6 interchangeable gobos, a rotating prism and an interchangeable graphics wheel for spectacular new effects, a highly precise iris. The fixture can also be used in wash mode by inserting a new design of frost filter. It can be run at 1400W or in energy saving mode at 1200W.

Features:

• 1400W OSRAM discharge lamp
• 8-48 zoom
• Focus tracking system
• 6500 K output color temperature
• Very high CRI
• CMY System + Linear CTO
• 7-color wheel
• 2 Wheels with 6+6 rotating Gobos
• Rotating Prism
• Interchangeable Graphics Wheel
• 16 blades fast Iris
• Variable “soft edge” frost
• Variable flood frost
• Very precise 0-100% dimmer
• Fast stop/strobe effect
• Light can be run at 1400W or 1200W
• Art-Net / RDM
• Quiet, reliable and road-ready
• Weight: 38 Kg

Specifications:

• POWER SUPPLIES
  • AC power input Neutrik PowerCON TRUE1 (IP65)
  • 200-240V 50/60 Hz
• INPUT POWER
  • 1800 VA
• LIGHT SOURCE
  • OSRAM Lok-it! HTI 1400/PS Lamp
    • Color Temperature: 6.000 K
    • Life: 750 hrs
    • Very high CRI ( 90)
    • Luminoux flux: 120000 lm
    • Base PGJ28 Lok-it!
    • Light can be run at 1400W or 1200W in Energy Saving mode
• OPTICS
  • Zoom 7 – 48
  • 142 mm front lens
  • Electronic Focusing
• COLOR SYSTEM
  • CMY System
  • Linear CTO
  • Color Wheel with 7 color filters + white
• EFFECTS SECTION
  • One wheel with 6 rotating gobos (image 23 mm)
  • One wheel with 8 fixed gobos (image 23 mm)
  • Rotating Prism with 4 faces
  • 16 blades fast Iris
  • Variable “soft edge” frost
  • Variable flood frost
  • Very precise 0-100% dimmer
  • Fast stop/strobe effect
• CONTROL AND PROGRAMMING
  • 37 or 41 DMX 512 control channels
  • DMX protocol signal: USITT DMX 512
  • Art-Net / RDM
  • Display: LCD 128 x 64 dots, backlit LED, white on black
  • Pan and Tilt Resolution: 16 bit
  • Focus Indexing Resolution: 16 bit
  • Dimmer Resolution: 16 bit
  • Rotation gobo Resolution: 16 bit
  • Movement control: vectorial
  • DMX signal connection: 5 pole XLR input and output
  • Software upload through DMX input / Ethernet input
• BODY
  • Aluminium structure with die-cast plastic cover.
  • Two side handles for transportation.
  • Device locking PAN and TILT mechanisms for transportation and maintenance.
• MOVING BODY
  • PAN
    • Angle Rotation: 540
    • Fast speed: 4.210 sec
    • Normal Speed: 4.958 sec
    • Resolution TILT: 2.10938
    • Resolution TILT FINE: 0.00824
    • Accuracy:
    • Resolution 0.2 (Range 0.4)
  • TILT
    • Angle Rotation: 268
    • Fast speed: 2.536 sec
    • Normal Speed: 3.246 sec
    • Resolution TILT: 1.04688
    • Resolution TILT FINE: 0.00409
    • Accuracy:
    • Resolution 0.2 (Range 0.4)
• ELECTRONICS
  • Long life self-charging buffer battery.
  • ON/OFF lamp control from the lighting desk.
  • Function reset from the lighting desk.
  • “AUTOTEST” function from men
  • Electronic monitoring with status error
  • Cooling system monitoring
  • DMX level monitoring on all channels
  • Internal data transmission diagnostics
  • Firmware Upgrade with no power
  • Firmware upload from another fixture
• SAFETY DEVICES
  • Bipolar circuit breaker with thermal protection.
  • Automatic break in power supply in case of overheating or failed operation of cooling system.
  • Forced ventilation with axial fans.
• WORKING POSITION
  • Working in any position
  • Hanging system: with fast-lock omega clamps (1/4 turn) on the base
• CE MARKING
  • In conformity with the European Directives:
    • 2014/35/EU Safety of electrical equipment supplied at low voltage (LVD)
    • 2014/30/EU Electromagnetic Compatibility (EMC)
    • 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
    • 2009/125/EC EcoDesign requirements for Energy-related Products (ErP)
• WEIGHT
  • 38 kg (83.6 lbs)