Clear-Com TW-47 2-Way Radio Interface

Clear-Com TW-47 2-Way Radio Interface

Clear-Com/RTS 2-Way Radio Interface, connects Clear-Com or RTS to any 2-way radio. Compatible with both Clear-Com and RTS, TW-47 connects virtually any set of walkie-talkies to anyone on the wired partyline intercom; simply use one walkie-talkie as a basestation. The base station radio is keyed from the intercom call signal. Extensive RF and EMI isolation prevents interference from entering the intercom system. Separate transmit and receive level controls are provided, along with audio level and transmitter keying indicators. The stand-alone interface is powered by the intercom line. *Note: Two-way radio must have headset and microphone jacks.

• Radio to partyline:
• Line chracteristics:
• Frequency response: 200-20KHz 3dB
• Max gain: >=-5dBu
• Distortion: <=0.3%
• Noise: <=-70dBu
• Max level before clipping: >=+17dBu
• Green LED threshold: -22dBu 3dB
• Red LED threshold: -16dBu 3dB
• Input impedance: 400? 100?
• Partyline to radio:
• Line characteristics:
• Frequency response: 200-8KHz 3dB
• Max gain J7 on, J8 on: -12dBu 3dB
• Max gain J7 off, J8 on: +2dBu 3dB
• Max gain J7 off, J8 off: +27dBu 3dB
• Distortion: <=0.3%
• Noise: <=-50dBu
• Max level before clipping: >=0dBu
• Power requirements:
• Input voltage range: 20-30VDC
• Quiescent current: <=40mA
• Current with audio: <=50mA
• Current with call: <=60mA
• Rear panel connectors: (1) XLR3F and (1) DB-9F
• Front panel controls and indicators:
• Transmit: (1) red LED
• Audio level hi: (1) red LED
• Audio level norm: (1) green LED
• Receive level adjust: (1) control
• Transmit level adjust: (1) control
• Dimensions: 1.63″ x 4.75″ x 5.15″ / 41.4 mm x 121 mm x 131 mm (HxWxD)
• Weight: 1 lb. 4 oz. / 0.6 kg