Clear-Com RS-602 2-Channel Belt Pack Station
Dual channel with 6-pin female and male XLR, 4-pin male XLR headset connector, 2.5 mm AUX headset connector and an RS-232 data connector.
Features:
- Two intercom channels
- Local input for program audio
- Loopable program audio; you can connect program audio to other beltpacks in a daisy-chain configuration
- Program audio volume control
- RS-602 offers monaural headset connector
- 6-pin Switchcraft-style intercom connectors
Specifications:
- General
- Amplifier Design: I.C. amplifiers, including solid-state digital switching and signaling circuits. Current-limited and short-circuit protected.
- Signal to Noise: >75 dB
- Bridging Impedance: >15k
- Line Level: -14 dB, +5 dB max.
- Sidetone Adjust: >35 dB
- EMI and RFI rejection: >60 dB
- Microphone Pre-Amplifier
- Headset Mic Impedance: 200 ohms
- Gain, mic to line: 41 dB (dynamic)
- Limiter Range: 26 dB
- Frequency Response: 200 Hz 12 kHz contoured for intelligibility
- Program Input
- Program input Balanced, transformer isolated
- Input sensitivity: 20 dBv to +10 dBv
- Frequency response 50 Hz 18 Hz, 2 dB
- Headphone Amplifier
- Load Impedance: 50 – 2,000 ohms
- Output Level: +17 dBv before clipping
- Distortion: <0.1% THD @ 1 kHz
- Gain, line to output: +34 dB
- Frequency Response: 100 Hz – 18 kHz, 2dB
- Connectors
- Intercom Line: (2) 6-pin XLRMF
- Headset: 4-pin XLRM
- Power Requirements
- 55mA quiescent
- 62mA average talk, both channels simultaneously
- 50mA talk with signaling, both channels simultaneously
- DC Voltage Range: 12-32 volts
- Environmental
- Operating Temp. Range: 0C – 70C (32F – 158 F)
- Humidity: 0 – 90% relative humidity
- Dimensions
- 4.58″H x 3.73″W x 1.34″D (116 x 95 x 34 mm)
- Weight
Unconditional Satisfaction Guarantee
