Elation Enode 4 Universe Artnet DMX Interface

Elation Professional eNode 4 Ethernet Node

The eNode4 is an Ethernet node that serves four DMX512 outlets, compatible with the Artnet and sACN protocols. All 4 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode4 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial. The eNode4 can be set on a flat surface or mounted to a truss structure using the quick lock omega bracket, which is included. Connections: 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors and 4 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A).

Features:

• DMX routing, universe setting
• Input and output enable / disable
• DMX output frame rate setting
• Supported protocols: DMX, DMX512-A, RDM, Art-Net, sACN
• Protocol selection per port
• IP settings
• Unit ID and labeling
• Ethernet activity indication on front panel
• Multi language support
• Supported Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
• DMX Port Direction: Input or output (configurable)
• DMX Port Isolation: Optic and galvanic isolation per port
• DMX Port Termination/Biasing: Yes
• Ethernet Features:
• Length: 255mm
• Width: 173mm
• Vertical Height: 43mm
• Weight: 1.6kg