ETC Desire D40XT Studio HD LED Par
The Desire D40XT Studio HD LED Par delivers illumination with white-light LED technology housed in a sealed IP66 outdoor-rated enclosure.
This fixture combines sealed, watertight construction with silent operation, no fan cooling. It also gives you the choice of multiple lens options and control via console integration or standalone mode.
The LED Par allows you to choose from three distinct LED configurations and multiple lens options to suit your lighting needs.
The Desire D40XT Studio HD LED Par offers variable colour temperature mixing combining warm and cool white LEDs, while five carefully selected colours from the x7 Colour System fill spectral gaps.
The Desire D40XT Studio HD LED Par is available in black, silver or white.
Specifications:
- Source
- LED details-40 Lumileds LUXEON Rebel LED
- Max lumens-Studio HD: 3,194
- Lumens-Studio HD: 33.2
- L70 rating (hours to 70% output)-50,000 hours
- Colour
- Colours used-Studio HD: Red, Amber, Green/Cyan, Blue, Warm White, Cool White
- Calibrated array-Studio HD: Yes
- Red shift-Yes
- Optical
- Beam angle range-871
- Aperture size-7.5 in
- Pattern projection-No
- Pattern size-N/A
- Camera flicker control/Hz range-Yes: 90025,000 Hz
- Notes-
- Secondary lenses available for multiple beam-spread options
- Sealed, factory-installed lenses available for permanent installations
- Control
- Input method-DMX512 via watertight 5-pin XLR
- Protocols-DMX512/RDM
- Modes (footprint)-See page 5
- RDM configuration-Yes
- UI type-LCD
- Local control-Yes
- Onboard pre-sets-Yes
- Onboard sequences-Yes
- Onboard effects-No
- Fixture-to-fixture control-Yes
- Notes-15-bit virtual dimming engine
- Electrical
- Voltage range-100240 VAC 50/60 Hz
- Input method-Waterproof, 39 in power in and thru Requires power from non-dimmable source
- Inrush-
- 15 A at 120 V (First half-cycle)
- 40 A at 240 V (First half-cycle)
- Fixtures per circuit (Note: All measurements are for 120 V, 60 Hz. Results may vary in different regions.)-10 (15 A may be fed on same circuit)
- Wattage typical-110
- Current draw-1/0.5 A
- Thermal
- Ambient operating temp--2040 C (-4104 F)
- Fan (controllable)-No
- Droop compensation-Yes
- dB range-N/A
- BTUs/hour-375.32
- Physical
- Materials-Die-cast, all metal housing
- Colour options-Black
- IP rating-IP66 for exterior, wet location use
- Weight-6.4 kg (14 lb)
- Included accessories-Hanging yoke, optional yoke/floor stand
- Warranty
- Fixture-5 years
- LED array-10 years
- Regulatory and Compliance
- Approved regulatory standards-
- cETLus Listed
- Conforms to UL1598
- Certified to CSA C22.2 No. 250.0
- CE Compliant
Unconditional Satisfaction Guarantee
