ETC Desire D60XTI Lustr+ LED Par

ETC Desire D60XTI Lustr+ LED Par

D60XTI Lustr+ brings the amazing control of the x7 Colour System and the long throw of a D60 to your facility for permanent installation. With its IP66 rating, this luminaire is ready for mounting inside or outsidewherever you need it.

The D60XTI Lustr+ offers a rugged die-cast enclosure, noiseless fanfree operation and multiple lens options that can be changed on site.

The D60XTI Lustr+ is optimised with six colours plus high intensity white LEDs to create an ideal frontlight wash fixture. Full range colour, with an emphasis on lighter colours and white.

The D60XTI Lustr+ is available black, silver or white.

Specifications:

• Source:
  • LED details: 60 Lumileds LUXEON Rebel LED
  • Max lumens: Lustr+: 4,317
  • Lumens per watt: Lustr+: 34.9
  • L70 rating (hours to 70% output): 50,000 hours
• Colour:
  • Colours used: Lustr+: Red, Amber, Green, Cyan, Blue, Indigo, White
  • Colour temperature range: 2,7006,500 K
  • Calibrated array: Lustr+: Yes
  • Red shift: Yes (not available on static white)
• Optical:
  • Beam angle range: 817
  • Aperture size: 9 in
  • Pattern projection: No
  • Pattern size: N/A
  • Camera flicker control/Hz range: Yes: 90025,000 Hz
  • Notes: Secondary lenses available for multiple beam-spread options
• Control:
  • Input method: DMX512 via termination board
  • Protocols: DMX512/RDM
  • RDM configuration: Yes
  • UI type: None (configure via RDM)
  • Local control: No
  • Onboard presets: Yes
  • Onboard sequences: No
  • Onboard effects: No
  • Fixture-to-fixture control: No
  • Notes: 15-bit virtual dimming engine
• Electrical:
  • Voltage range: 100240 VAC 50/60 Hz
  • Input method: Waterproof, 72 outdoor power lead/Requires power from non-dim source
  • Inrush: 46 A at 120 V (First half-cycle) 77 A at 240 V (First half-cycle)
  • Fixtures per circuit(All measurements are for 120 V, 60 Hz. Results may vary in different regions.): 10 (15 A may be fed on same circuit)
  • Wattage typical: 124
  • Current draw: 1 A
• Thermal:
  • Ambient operating temp: -2040 C (-4104 F)
  • Fan (controllable): No
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 423.088
• Physical:
  • Materials: Die-cast, all metal housing
  • Colour options: Black
  • Mounting options: Single-pole mount, wall or square pole mount, twin fixture pole mount
  • IP rating: IP66 for exterior wet-location
  • Weight: 10.43 kg (23 lb)
  • Included accessories: Hanging yoke, data termination board, accessory ring for installations of secondary lenses
  • Notes:
    • Cable diameter: power 0.53 in
    • Effective projected area (EPA): 0.95
• Warranty:
  • Fixture: 5 years
  • LED array: 10 years
• Regulatory and Compliance:
  • Approved regulatory standards:
    • cETLus Listed
    • Conforms to UL1598
    • Certified to CSA C22.2 No. 250.0
    • CE Compliant