Hertz CS 200 S4 Cento subwooferis the perfect enhancement to every sound system,to fully enjoy the authentic Hertz Sound Experience! The R&D team, always at the forefront in the search for innovative solutions, with unfailing effortsucceeded in obtaining powerful bass frequencies from compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 9,6 l (0.33 CF).The reduced depth, the compact magnetic group, and the lack of rear decompression holeallow the box to be shaped around the subwoofer, obtaining a depth almost the same as the driver itself, for maximum freedom of installation on any type of car.The special cooling system for the six-layer voice coilkeeps the operating temperature within the optimal range, even in case of extended listening sessions at high sound pressure. An innovative system of dynamic fluid optimization and turbulence reductionwas achieved, thanks to the spider support acting as an air duct towards the venting holes on the basket. This drastically reduces the acoustic distortions generated by air compression at high excursions. The cone geometry, the suspension, and the spiderhave been optimized using FEM (Finite Element Method) simulationsto obtain the best performance configuration, which guarantees control and low distortions even at high mechanical excursions of the mobile group. The terminal block uses solid push connectorsthat accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection – even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high-resistance ABS plastic gasketthat allows the grille to be fixed to finish the installation. The optional grillein robust black metal mesh offerstotal protection for the subwoofer,and an appealing look – thanks to the Hertz diamond aluminum logo.With the Cento subwoofers, even the younger enthusiasts will enjoy the exciting reproduction of low frequencies in the car!
Specs
Technical Specs
Size mm (in.) 200 (8)
Power Handling – Continuous W 150
Power Handling – Peak W 300
Impedance Ohm 4
Voice Coil Type single
No Filter Component SUBWOOFER
Voice Coil 35 (1.38)
Magnet size D x d x h mm (in.) 120 x 50 x 28 (4.72 x 1.97 x 1.1)
Weight of one component kg (lb.) 2,87 (1.30)
Magnet High density flux ferrite
Cone Polyproyilene
Xmech mm (in.) 11,5 (0.45)
Electro-acoustic Specs
D mm 172
Xmax mm 9
Re Ohm 3,3
Fs Hz 40
Le mH 1,7
Vas I 13,7
Mms g 76,8
Cms mm/N 0,21
BL T*m 10,6
Qts 0,52
Qes 0,58
Qms 5
Spl dB 84
Unconditional Satisfaction Guarantee
