JBL LSR6332L 12″ Passive Studio Monitor

LSR6332 Linear Spatial Reference Studio Monitor System – Left

The LSR6332 incorporates a 12″ Differential Drive dual coil woofer, 5″ Kevlar midrange speaker and 1″ titanium composite tweeter. THX pm3 Approved.

Features:

• Advanced Linear Spatial Reference design ensures flatter response at the mix position.
• Differential Drive technology with dynamic braking for extended low frequency response and low power compression.
• Neodymium midrange with 2″ voice coil and Kevlar cone material for extended frequency response and low distortion.
• Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
• High-Density baffle for low enclosure resonance and stable inertial ground
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Magnetically shielded for use near video monitors.
• Reinforced enclosure and convenient mounting points allow mounted installation.
• Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
• Available as mirror image left and right models.

Specifications:

• Input Impedance: 4 ohm (Nominal)
• Anechoic Sensitivity: 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
• Frequency Response: +1. -1.5 dB (60 Hz 22 kHz)
• Low Frequency Extension: -3 dB: 54 Hz -10 dB: 35 Hz
• Enclosure Resonance Frequency: 33 Hz
• Long Term Maximum Power (IEC265-5): 200 W continuous average; 800 W peak
• Recommended Amplifier Power: 150 W – 1000 W (rating into 4-ohm load)
• High Frequency Control: 0 dB, -1 dB (2.5 to 20 kHz)
• Distortion, 96 dB SPL, 1 m:
• 2nd Harmonic (below 120 Hz): <1.5%
• 3rd Harmonic (below 120 Hz): <1%
• 2nd Harmonic (120 Hz to 20 kHz): <0.5%
• 3rd Harmonic (120 Hz to 20 kHz): <0.4%
• Distortion, 102 dB SPL, 1 m:
• 2nd Harmonic (below 120 Hz): <1.5%
• 3rd Harmonic (below 120 Hz): <1%
• 2nd Harmonic (80 Hz to 20kHz): <1%
• 3rd Harmonic (80 Hz to 20kHz): <1%
• (<0.4%, 250 Hz - 20 kHz)
• Power Nonlinearity:
• 30 W (20 Hz to 20 kHz): <0.4 dB
• 100 W (20 Hz to 20 kHz): <1.0 dB
• Low-Mid Frequency Crossover: 4th Order Acoustic Linkwitz-Riley: 250 Hz
• Mid-High Frequency Crossover: 4th Order Acoustic Linkwitz-Riley: 2.2 kHz