JBL VLA-C265-BK 2x 10-Inch Two-Way Horn-Loaded Line Array 65-Degree Loudspeaker System – Black

JBL VLA-C265-BK 2x 10-Inch Two-Way Horn-Loaded Line Array 65-Degree Loudspeaker System – Black

Features:

• Compact line array module optimized for permanent install applications
• Advanced technology component transducers for low weight and high output
• Outdoor IP55 rated enclosure for protection from dust and water
• Comprehensive rigging points for creating a line array configuration
• Fiberglass box construction and weatherized components
• Can be bi-amplified for maximum SPL, or fed passively for reduced amplification costs
• 65 horizontal coverage pattern

Specifications:

• Frequency Range (-10dB): 85 Hz – 19 kHz
• Frequency Response (3 dB): 108 Hz 16.5 kHz
• Full Range: 800 W Continuous Pink Noise (3200 W peak), 2 hrs; 400 W Continuous Pink Noise (1600W peak), 100 hrs
• Bi-amp LF: 800 W Continuous Pink Noise (3200 W peak), 2 hrs; 400 W Continuous Pink Noise (1600W peak), 100 hrs
• Bi-amp HF: 150 W Continuous Pink Noise (600 W peak), 2 hrs; 50 W Continuous Pink Noise (200 W peak), 100 hrs
• Full-Range: 80 V Rms (2 hrs), 160 V peak
• Maximum SPL (1m): 131 dB Cont. Ave (2 hrs), 137 dB Peak
• Coverage Pattern (-6 dB): Horizontal: 65 (+15/-10, 1.5 kHz to 15 kHz); Vertical: Varies with array size and configuration
• Amplifiers: Crown DCi Family with DSP on-board
• Recommended: Crown DCi 2 | 1250N, Crown DCi 4 | 1250N/ND/DA, Crown DCi 2 | 2400N, Crown DCi 4 | 2400N
• LF Driver: 2 x 2261FF, 254 mm (10 in) diameter, each with two 76 mm (3 in) diameter voice coils, Neodymium Differential Drive, Direct Cooled
• HF Driver: 3 x 2415K, D2 Dual Diaphragm Dual Voice Coil Compression Drivers, each with two 38 mm (1.5 in) dia. Voice Coils; 21 mm (0.8 in) exit
• Enclosure Material: Fiberglass shell, gelcoat finish, with 18 mm Birch plywood internal bracing
• Grille: Powder coated 14 gauge hex-perforated steel with zinc under-coating, backed with acoustically transparent cloth and hydrophobic screen
• Inter-Enclosure Angles:
  • VLA-C265 to VLA-C265: 1.5, 2.4, 3.8, 6.0, 9.5 using VLA-C265 Bracket Plate (included with VLA-C265)
  • VLA-C265 to VLA-C2100 (either model on top/bottom): 1.9, 3.0 using VLA-C2100 Bracket Plate (included with VLA-C2100) and 4.7, 7.5, 11.9 using VLA-C265 Bracket Plate (included with VLA-C265)
  • VLA-C265 below VLA-C125S Subwoofer (VLA-C265 cannot be connected above C125S): 0, 5 using VLA-C125S Bracket Plate (included with VLA-C125S)
• Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water)
• Terminals: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9mm (0.375 in) spade lugs. Touch-proof covers
• Colors: Black
• Dimensions (H x W x D): 381 x 848 x 460 mm (15.0 x 33.4 x 18.1 in)
• Net Weight (each): 37.7 kg (83 lbs)
• Shipping Weight (ea): 44.0 kg (97 lbs)
• Included Accessories:
  • 2 pcs. VLA-C265 Bracket Plates
  • 8 pcs. M10 x 35 mm stainless steel bolts (1.5mm pitch, 6 mm hex-drive) for attaching Bracket Plates
  • 2 pcs. Plastic Trim Cover Panels for Bracket Plates, each attaches via 4 pcs (8 total) 3-32 x trusshead, phillips-drive, stainless steel bolts
• Optional Accessories: VLA-C-SB2 (JBL-VLACSB2BK) Suspension Bracket Kit