Martin MAC Aura DMX RGBW LED Moving Wash Light

Martin Mac Aura DMX RGBW LED Moving Wash Light

The MAC Aura is an award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The result of out-of-the-box creative thinking, it is the first LED moving head wash light to combine multicolor beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights.

Features:

• Single-lens wash with fully premixed color
• Broad color palette, RGBW color mixing
• Eye-candy Aura Effects
• Built-in FX engine
• 3850 Lumens output
• Compact, low weight design (5.6 kg)
• Uniform shades
• 11 to 58 zoom
• Rapid movement
• High efficiency, low power consumption, long lifetime

Specifications:

Dynamic Effects

• Beam color mixing: RGBW
• Aura (secondary lens array illumination) color mixing: RGB
• Beam color temperature control: CTO, variable 10 000 – 2500 K
• Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
• Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
• Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
• Electronic dimming: Independent beam and aura, four dimming curve options
• Zoom: 11 – 58 (one-tenth peak angle)
• Pan: 540
• Tilt: 232
• Pan and tilt speed: Adjustable via onboard control panel and DMX

Control and Programming

• Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
• Macro programs selectable via DMX: Synchronized beam and aura effects
• Control: DMX
• RDM: Implemented
• Control resolution: 8-bit, with 16-bit control of pan and tilt
• DMX channels: 14/25
• Setting and addressing: Control panel with backlit graphic display
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20
• Transceiver: RS-485
• Fixture software update: Via DMX with Martin USB Duo DMX Interface Box

Optics

• Light source: Osram Ostar high-power emitters
• LED refresh rate: Beam 1220 Hz, aura 4395 Hz
• Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
• *Figure obtained under manufacturers test conditions
• Photometric Data
• Total output: 3850 lumens (zoom at maximum)

Construction

• Color: Black
• Housing: High-impact flame-retardant thermoplastic
• Protection rating: IP20

Installation

• Mounting points: One M12 threaded hole for rigging clamp
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 100 mm
• Minimum distance to illuminated surfaces: 200 mm

Connections

• AC power input: Neutrik PowerCon
• AC power throughput: Neutrik PowerCon
• DMX and RDM data in/out: 5-pin locking XLR

Electrical

• AC power: 100-240 V nominal, 50/60 Hz
• Maximum total power consumption: 260 W
• Power supply unit: Auto-ranging electronic switch mode
• Main fuse: 5 AT (slow blow)
• Typical power consumption, all effects static, zero light output: <15 W

Typical Power and Current

• 100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
• 120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
• 208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
• 230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
• 240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

• Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.): 40 C
• Minimum ambient temperature (Ta min.): 5 C
• Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

Physical

• Length: 302 mm across yoke
• Width: 302 mm across yoke
• Height: 360 mm, head straight up
• Weight: 5.6 kg without accessories

Included Items

• M12 bolt suitable for use with Martin rigging clamps:
• User manual