Martin P3-PC System Controller License Only

Martin P3-PC System Controller License Only

The P3-PC works as a PC-based P3 System Controller for smaller Martin LED display setups up to 20.000 pixels; as an off-line editor for the entire range of P3 System Controllers to preprogram shows anywhere on a PC; and as a tool for firmware uploads and addressing/testing of Martin LED Video products.

• Off-Line Editor for all P3 System Controllers
• Stand-Alone P3 System Controller software for small setups
• Compatible with all Martin LED video products (panels and creative products)

Features:

• Drives up to 20.736 pixels
• On-screen grabber for video-capture
• Automatic Hippotizer interface when installed on Hippo V4 or newer
• Real time visualization of the video mapping
• Compatible with any standard PC running Windows
• Free download from Martin website
• Most user-friendly LED Video processor on the market
• Compatible with all Martin LED Video products (panels and creative products)
• All connected products report status and problems back to the controller for easy monitoring and maintenance
• Showfiles created on P3-PC can easily be loaded onto a USB stick and transfered to any other P3 System Controller

Specifications:

Control/User Interface

• PC hardware dependent

Minimum System Requirements

• Computer running Windows XP, Vista 7, 8, 8.1 or 10 32/64 bit
• Intel Core processor
• 1024 MB RAM (3 GB recommended)
• 100 MB available hard disk space
• Display with 1280 x 1024 resolution or better
• USB 1.1 (or higher) port for Martin One-Key
• Full administrator rights on PC
• Gigabit Ethernet port for P3 output

Video Processing

• Controller pixel processing capacity: 20 736 pixels*
• Controller fixture capacity: 1000 fixtures*
• Maximum workspace area: 2 073 600 pixels
• Maximum active capture area: 2 073 600 pixels
• System processing depth: 16 bits per color (48 bits per pixel)
• System latency, screen capture: 3 frames
• System latency, Hippotizer interface: 3 frames
• Latency between first and last panel: None
• Image rotation
• Scaling (global and mixed pixel pitch)
• Gamma curve selection and adjustment
• Real-time panel content remapping
• Real-time color temperature and color space control
• Real-time preview of video input and mapped canvas

DMX 512 / Art-Net real-time controllable parameters

• Up to 4 universes of Art-Net input*
• Global intensity
• RGB intensity
• Color temperature
• X-Y video image position
• Video image rotation
• Freeze
• Blackout
• Test pattern selection
• Preset recall (incl. video input selection and scaling)

Kinesys K2 / Vector / Tait Navigator real-time controllable parameters

• X-Y video image position
• Video image rotation
• *See also P3 System Controller Capacity Info Note on Support & Downloads page

Screen Capture

• Real-time capture of any section of screen of PC on which P3-PC is installed
• Capturing frame rate configurable up to 50 Hz
• No direct support for third-party capture cards

Hippotizer Interface

• Direct capture of any Hippotizer viewport when P3-PC is installed on a Hippo V4 (or newer) media server

P3 Signal Protocol

• Signal type: Gigabit Ethernet
• Protocol: Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, shielded, CAT 5e or better
• Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch
• Max. number of panels per line: 50, extendable with Ethernet switch

Installation

• Any standard PC running Windows Vista, XP, 7, 8, 8.1 or 10 (requires Martin One-Key USB stick with P3-PC License)

Connections

• P3 signal output to fixtures via PC network port (Gigabit Ethernet)

Included Items

• Martin One-Key with P3-PC license

Related Items

• Martin P3-100 System Controller: P/N 90721010
• Martin P3-200 System Controller: P/N 90721020
• Martin P3-300 System Controller: P/N 90721060