Martin P3 PowerPort 1000 IP Rental Power Supply

Martin P3 PowerPort 1000 IP Rental Power Supply

The P3 PowerPort 1000 IP Rental is an integrated power supply and data processor for Martins rental range of creative LED video products, including the VDO Sceptron and VC-Dots. When driven by one of Martins award-winning P3 System Controllers, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive. A full outdoor rating with robust IP65-rated connectors make the product perfect for outdoor rental installations.

Features:

• Power and data processor for all Martins rental market creative LED video products
• Flexible integration: can be located remotely, indoors or outdoors
• Easy cabling and configuration
• P3 image processing technology
• Set-up and addressing via P3 System Controller family
• No local configuration needed
• P3 input and thru to allow daisy-chaining
• 4 hybrid power/data output ports
• Truss-mountable or free-standing
• Can be located up to 50 m away from the creative LED video products
• IP65

Specifications:

Physical

• Length: 520 mm (20.5 in.)
• Width: 460 mm (18.2 in.)
• Height: 146 mm (5.8 in.)
• Weight: 8.5 kg (18.8 lbs.)

Control and Programming

• Addressing and status: Via P3 System Controller
• Mapping: Via P3 System Controller
• Firmware update: Via P3 System Controller

Control/User Interface

• Device status: Multicolor status LED
• Power output status: Four LEDs
• Data output status: Four LEDs
• Device test and reset: Pushbutton to call up local test patterns and reset device
• Status LEDs and pushbutton can be disabled remotely if required

P3 Signal Protocol

• Signal type: Gigabit Ethernet
• Protocol: Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, CAT 5e or better
• Cable length: Up to 100 m (328 ft.) between any 2 devices, extendable with Ethernet switch or conversion to fiber

System integration

• VC-Dot family via VC-Feeder
• Exterior PixLine family
• VDO Sceptron family
• VC-Grid family (indoor product)
• VC-Strip family (indoor product)
• Exterior Dot-HP family

Construction

• Protection rating: IP65
• NEMA enclosure rating: Type 3
• Housing: Aluminum
• Color: Matt black
• Effective Projected Area (EPA): 0.22 m2
• RoHS compliant

Installation

• Mounting: Flown from rigging clamps or free-standing
• Orientation: Any, except with connectors facing up or lid facing down

Connections

• Power input: Neutrik PowerCON True1
• P3 data in/out: Neutrik EtherCON Cat 6
• Combined power & data out: Four 6-pin custom (BBD) IP66-rated sockets

Electrical

• AC power: 120-240 V nominal, 50/60 Hz
• Power supply units: Auto-ranging electronic switch-mode
• Typical total power consumption: 1000 W (including full load of connected display devices, all at full intensity)
• Typical half-cycle RMS inrush current at 230 V, 50 Hz: 20.9 A
• Total power consumption in idle state (at 25 C, all connected devices powered off): 22 W

Thermal

• Cooling: Convection
• Maximum ambient temperature (Ta max.): 55 C
• Minimum ambient temperature (Ta min.): -30 C
• Total heat dissipation (calculated, +/- 10%): 345 BTU/hr. (not including display devices but with system at full load)

Approvals

• EU safety: EN 60950
• EU EMC: EN 55032, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 60950-1
• Canadian safety: CSA C22.2 No. 60950-1