Martin P3 PowerPort 1500 Integrated Power Supply

Martin P3 PowerPort 1500 Integrated Power Supply

The P3 PowerPort 1500 is an integrated power supply and data processor for the Martin range of creative LED video products, including the VDO Sceptron, Exterior PixLines, VC-Grids, VC-Strips and VC-Dots. When driven by one of Martins award-winning P3 System Controllers, it combines stable power delivery with high-speed, high-capacity video processing. Setup and configuration are easy and intuitive.

• Indoor power and data processor for all Martin creative LED video products
• Flexible integration: can be located remotely from video display products
• Easy cabling and configuration

Features:

• P3 image processing technology
• Set-up and addressing via P3 System Controller family
• P3 input and thru to allow daisy-chaining
• 4 hybrid power/data output ports
• Wall-, truss- and rack-mountable
• Can be located up to 50 m away from the creative LED video products

Specifications:

Physical

• Depth: 335 mm (13.2 in.)
• Width: 482 mm (19.0 in.)
• Height (rackmount 2U): 88 mm (3.5 in.)
• Weight: 10 kg (22.1 lbs.)

Control and Programming

• Addressing and status: Via P3 System Controller
• Mapping: Via P3 System Controller
• Firmware update: Via P3 System Controller

Control/User Interface

• Device status: Multicolor status LED
• Power output status: Four LEDs
• Data output status: Four LEDs
• Device test and reset: Pushbutton to call up local test patterns and reset device

P3 Signal Protocol

• Signal type: Gigabit Ethernet
• Protocol: Proprietary Martin P3
• Hot pluggable: Yes, electrically isolated at all connections
• Cable type: Ethernet, CAT 5e or better
• Cable length: Up to 100 m between any 2 devices, extendable with Ethernet switch

System integration

• VC-Dot family via VC-Feeder
• Exterior PixLine family
• VDO Sceptron family
• VC-Grid family
• VC-Strip family
• Exterior Dot-HP family

Construction

• Housing: Steel and aluminum
• Color: Matt black
• Protection rating: IP20

Installation

• Mounting: 19-inch rackmount, wall mount, flown from rigging clamps

Connections

• Power input: Neutrik PowerCon
• P3 data in/out: Two Neutrik Ethercon RJ-45 sockets
• Combined power & data out: Four 4-pin female XLR sockets (hybrid power & data cable)

Electrical

• AC power: 100-240 V nominal, 50/60 Hz
• Power supply units: Auto-ranging electronic switch-mode
• Main fuses: 10 AT (slow blow) x 4
• Typical total power consumption: 1540 W (including full load of connected display devices, all at full intensity)

Thermal

• Cooling: Filtered forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 45 C
• Minimum ambient temperature (Ta min.): -20 C
• Total heat dissipation (calculated, +/- 10%): 530 BTU/hr. (not including display devices but with system at full load)

Approvals

• EU safety: EN 60950
• EU EMC: EN 55103-1, EN 55103-2, EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 60950-1
• Canadian safety: CSA C22.2 No. 60950-1

Included Items

• Mounting brackets incl. screws
• Safety cable attachment eyelet

Please note that a power input cable is not supplied with the product and must be ordered separately (see Accessories)

Accessories

• Air Filters 60×60, Set of 10: P/N 50404543
• Power Cable, H07RN-F, PowerCON-to-PowerCON, 1.2 m (4.0 ft.): P/N 91611798
• Power Cable, H07RN-F, PowerCON-to-PowerCON, 2.5 m (8.2 ft.): P/N 91611799
• Power Cable, H07RN-F, PowerCON-to-bare ends, 1.5 m (5.0 ft.): P/N 91611800
• Power Cable, H07RN-F, PowerCON-to-bare ends, 5 m (16.4 ft.): P/N 91611801
• Power Connector, Neutrik PowerCON NAC3MCA, male, cable mount: P/N 91611795
• Power Connector, Neutrik PowerCON NAC3FCA, female, cable mount: P/N 91611794

Rigging hardware

• G-clamp: P/N 91602003
• Half-coupler clamp: P/N 91602005
• Quick trigger clamp: P/N 91602007