Meyer Sound UPJunior Powered Loudspeaker

Meyer Sound UPJunior Powered Loudspeaker

This item is only sold in pairs.

Meyer Sounds UPJunior ultracompact VariO loudspeaker brings the sonic signature, versatile rigging, and extraordinary power-to-size ratio of the UPJ-1P to a smaller package. The UPJunior combines the advantages of a self-powered system with the placement and arraying flexibility afforded by a VariO rotatable horn. Though remarkably compact and lightweight, the UPJunior delivers a robust peak power output of 126 dB SPL at 1 meter, making it suitable for use as either a single, primary loudspeaker or within multicabinet horizontal and vertical arrays. Applications include AV presentations; small- to medium-sized main sound reinforcement systems; fill, delay, and effects systems; under-balcony coverage; and distributed systems. The UPJunior was bred for flexibility whether oriented vertically or horizontally. The VariO horn allows quick rotation to provide an 80-degree by 50-degree coverage pattern in either the horizontal or vertical plane. In size, weight, and output, the UPJunior integrates seamlessly with the UltraSeries UPM and UPJ loudspeakers. The UPJuniors low-mid frequency section employs an 8-inch neodymium magnet cone driver, while the high-frequency section utilizes an efficient 0.75-inch exit, 2-inch diaphragm compression driver. Strategically placed metric M8 threaded points allow simple mounting using either eyebolts or third-party pole assemblies.

Features:

• Exceptional fidelity and extended high frequency performance
• Outstanding power capability in a compact package
• Predictable and consistent performance ensures system design flexibility
• VariO horn provides versatile coverage options, whether loudspeakers are oriented horizontally or vertically
• Extraordinarily flat amplitude and phase response for tonal accuracy and precise imaging
• Constant-Q horn affords uniform response throughout the coverage area
• With QuickFly rigging can be mounted or flown as either a single cabinet or within arrays

Specifications:

• Acoustical
  • Operating Frequency Range1: 70 Hz 20 kHz
  • Frequency Response2: 76 Hz 18 kHz 4 dB
  • Phase Response: 250 Hz 18 kHz 45
  • Maximum Peak SPL3: 126 dB
  • Dynamic Range: >110 dB
  • Coverage4: 80 x 50
• Coverage5
  • 3.5 kHz
• Transducers
  • Low Frequency:
    • One 8″ cone driver with neodymium magne
    • Nominal impedance: 4
    • Voice coil size: 1.5″
    • Power handling capability: 300 W (AES)6
  • High Frequency7:
    • One 2″ compression driver
    • Nominal impedance: 12
    • Voice coil size: 3″
    • Diaphragm size: 3″
    • Exit size: 0.75″
    • Power handling capability: 100 W (AES)6
• Audio Input
  • Type: Differential, electronically balanced
  • Maximum Common Mode Range: 15 V DC, clamped to earth for voltage transient protection
  • Connectors: Female XLR input with male XLR loop output
  • Input Impedance: 10 k differential between pins 2 and 3
  • Wiring:
    • Pin 1: Chassis/earth through 220 k, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
    • Pin 2: Signal +
    • Pin 3: Signal (optional polarity reversal switch)8
    • Case: Earth ground and chassis
  • DC Blocking: Differential DC blocking up to maximum common mode voltage
  • CMRR: >50 dB, typically 80 dB (50 Hz 500 Hz)
  • RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
  • TIM Filter: <80 kHz, integral to signal processing
  • Nominal Input Sensitivity: 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
  • Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
• Amplifier
  • Type: Two-channel complementary MOSFET output stages (class AB/bridged)
  • Output Power9: 300 W total
  • THD, IM, TIM: <.02%
  • Load Capacity: 4 low channel, 12 high channel
  • Cooling: Forced air cooling over amplifier heatsink
• AC Power
  • Connector: PowerCon with looping output
  • Voltage Selection: Automatic
  • Safety Agency Rated Operating Range: 100240 V AC; 50/60 Hz
  • Turn-on and Turn-off Points10: 90264 V AC; 50/60 HzC
  • Current Draw11: Idle Current: 0.448 A rms (115 V AC); 0.285 A rms (230 V AC); 0.497 A rms (100 V AC)
  • Maximum Long-Term Continuous Current (>10 sec): 2.55 A rms (115 V AC); 1.55 A rms (230 V AC); 2.75 A rms (100 V AC)
  • Burst Current (<1 sec): 2.90 A rms (115 V AC); 1.70 A rms (230 V AC); 3.20 A rms (100 V AC)
  • Ultimate Short-Term Peak Current Draw: 12.0 A peak (115 V AC); 9.0 A peak (230 V AC); 13.0 A peak (100 V AC)
  • Inrush Current: 15.0 A peak (115 V AC); 13.0 A peak (230 V AC); 15.0 A peak (100 V AC)
• RMS Network (optional)
  • Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operators host computer
• Physical
  • Dimensions: 9.00″ w x 19.04″ h x 10.20″ d (228.60 mm x 483.55 mm x 259.08 mm))
  • Weight: 28 lbs (12.7 kg)
  • Enclosure: Premium birch plywood
  • Finish: Black textured
  • Protective Grille: Powder-coated hex-stamped steel, black mesh screen
  • Rigging: Aluminum end plates for mounting/flying cabinets with QuickFly and standard rigging options; metric M8 threaded points used for all UPJunior rigging